|
|
|
 |
|
Liquid Ring Vacuum Pumps
Material of construction
Bronze/Stainless steel impeller, Stainless steel shaft and all other contact parts in cast iron. Complete Stainless Steel Pumps are also offered.
Applications
Drying, Filtering, Degassing, distillation, Crystallization, industrial Vacuum, Pneumatic Conveying, Sterilization, Exhausting, Concentration of solvents, and etc.
Outstanding Features
- Silent and considerably vibration free running
- Needs no silencer
- Mechanical shaft seals on either end of shaft
- Maximum vacuum using water as sealant at 30° Centigrade and at sea level conditions :
Single stage models will be 700 mm Hg.
Double stage models will be 720 mm Hg.
- Negligible maintenance and easy overhauling procedures.
- Modification for use as compressor possible.
|
 |
Rotary High Vacuum Pump
Description
This series of vacuum pumps are rotary sliding vane, oil immersed type. The rotor, stator and end covers are made up of high nickel content cast iron and are machined to very fine tolerance. These pumps are ideal for handling dry and clean air. Gas ballast and belt guard are provided as standard equipment.
Features
- Exhaust valve is designed to eliminate "rapping" noise.
- Unique construction of the pump totally eliminates the sucking of air through the shaft seal.
- Pumps can also be operated with SAE-30 motor oil instead of vacuum oil.
- Water Cooling Arrangement can be provided if required at extra cost.
|
 |
Direct Drive High Vacuum Pump
|
Description
ACMEVAC Direct Drive, Oil-Sealed, Rotary High Vacuum Pumps are compact in size, as they are directly mounted on the motor flange. These pumps are light weight, well balanced and have exceptional size to performance ratio. These pumps have high pumping speeds and high water-vapor tolerance. The oil consumption is extremely low and they are air cooled.
Features
- Solenoid operated anti-suck back valve to prevent oil in-rush into the system in the event of stopping the pump and power failure.
- Provides uniform pumping speed.
- Gas ballast facility has been provided. This helps in preventing condensation of vapors inside the pump when condensable va pours are being evacuated.
- Suitably dimensioned inlet and outlet ducts to minimize conductance losses.
- Inlet port is adapted for ISO type quick clamp fittings for ease of assembly and disassembly of pump units.
- Inlet port is adapted for ISO type quick clamp fittings for ease of assembly and disassembly of pump units.
- Quality graded ferrous castings to improve wear resistance.
- Aluminum alloy, light weight oil tank with fins is designed to provide heat dissipation. This helps in running the pump cool and quiet.
- Heat treated Rotor and shaft to prevent solid particles from getting into the pump chamber.
- Flexible high torque coupling with vibration dampening insert.
- Pump is supplied with a sturdy steel base and anti-vibration mountings.
|
 |
Vacuum / Pressure Pumps
|
SERIES LVN
These are rotary sliding vane, oil lubricated, belt driven type and find applications in printing, labeling, vacuum forming, filling and sealing machines. Pumps are compact, light weight and can be placed inside original equipment.
- Both ball bearings are located on drive end of the rotor shaft and are housed in one end cover which has foundation holes for fitting on base plate. On removal of six bolts, the other end cover along with the stator comes apart exposing rotor and vanes for servicing.
- The grease filled bearings are separated from other parts with oil seals thus preventing contact with sucked in media.
- The oil from exhaust is baffled and re-circulated, thus eliminating oil drops being thrown out from exhaust nozzle.
- Model LV 150 has a built-in-suction filter an oil re-circulation system which enables the baffled oil to return to oil cup.
- Both the models are V-belt driven to give following advantages :-
Vibration-free running , Displacement variation possible by changing pulley ratio , can be located conveniently inside equipment.
SERIES LV
These pumps are rotary sliding vane, oil lubricated and directly coupled to three phase 1440 RPM A. C. motor, both mounted on a study base plate. These pumps are designed to give vacuum and pressure at the same time and eliminates the need for two separate units, one or vacuum and one for pressure. These pumps are specially designed for printing and packaging machines.
|
 |
Rotary Vacuum Pump
|
SERIES LVV
These are rotary sliding vane, oil lubricated, belt driven type and find applications in printing, labeling, vacuum forming, filling and sealing machines. Pumps are compact, light weight and can be placed inside original equipment.
SERIES MB
These pumps are directly mounted on motor flange and hence very compact. The pumps are oil free and no external
lubrication is required. They are light weight and easy potable. Applications include printing and packaging machines.
|
 |
Turbine Blowers
|
Description
These blowers consists of a dynamically balanced impeller which revolves in a stator-cum-compression chamber having very fine clearances between them. The impeller is fitted directly on to the motor shaft. Both the suction and pressure openings are located on the outer periphery of the stator to reduce impendence to the air flow thereby developing vacuum and pressure. Since the impeller rotates with no contact between itself and the casing, there is no wear and tear and requires no lubrication
Applications
Manufacturing of textiles, Measuring, medical and laboratory equipment, Printing and paper handling, Vacuum packaging, Waste water treatment, Reprographics Industry, Aeration of fluids, Pneumatic Conveying, Plastic Industry, Industrial Ovens, Vacuum cleaners, Air Pollution monitoring equipment
Features
- No lubrication is required since there is no friction and hence the air is absolutely oil free.
- Practically nil maintenance cost.
- Extremely compact units and can be mounted inside the machines
- Silencer ensures low noise level.
|
 |
Diaphragm Vacuum Pumps
Description
Acmevac offer 100% oil-free Diaphragm Vacuum Pumps/Compressors. They can be used either as vacuum pumps or oil-free compressors and are designed for delivery of uncontaminated air, gases or va pours. They are suitable for producing oil-free compressed air or vacuum.
Features
- Heads are made of aluminum alloy castings
- Diaphragms are made of neoprene rubber or other elastomers depending on applications
- Specially designed motors in single - phase and three-phase constructions
- Pumps are mounted on rubber pads for silent, vibration-free running
- Due to compact design, these pumps are ideal for laboratories and original equipment manufacturers
- Compact, light-in-weight, hence portable
|
 |
Vacuum Pumping Units
|
Description
In case single Vacuum pumps (liquid ring pumps, rotary vane pumps) are not suited for a certain process due to their pumping speed and / or their ultimate vacuum, a combination with twin lobe pumps can be used.
These Vacuum Pumping Units consist of rotary vane pump twin lobe pumps as fore-pump and rotary vane pump or liquid ring pump as backing pump. The fore-pump picks up oil necessary for its lubrication from the backing pump. The exhaust from the fore - pump is connected to the suction side of the backing pump thereby giving advantage of high pumping speed at higher vacuum. These units are highly energy efficient and consume less power than conventional single vacuum pumps.
These pumping units are of compact design and mounted on base frames ready for use. They are tailor - made and are offered to suit user's requirements.
|
 |
Industrial Vacuum Cleaners
Description
The "Swiss Vac" range of Industrial Vacuum Cleaners are suitable for wet and dry applications and have a patented triple filter system for protection of blower. Motors are continuously rated. Collection container is made of SS-304. Various nozzles and accessories are available. The machines are compact, and easy to maneuvers.
|
 |
Floor Scrubber-Driers
Description
Vacutec FSD Series is a mains operated Scrubber-Driers for quick, economical & effective cleaning of all types of hard floors. The machine is extremely compact, ruggedly constructed & guarantees high degree of cleaning. The machine has built-in suction tank and detergent tank. Dirty water is completely sucked into a collection tank by powerful suction leaving a dry clean floor. The machine is fabricated from 16 gauge stainless steel for long service life.
Vacutec FS Series of Floor Scrubbers are designed to cleanse & shine all types of dirty floors where sticky dirt cannot be cleaned by traditional brooms & wet cloth mopping.
|
 |
Ride-On Floor Sweeper
Description
Ecological, noiseless, strong, powerful. A complete range of sweepers which can collect in one pass dust and rejects in any place. Batter operated or diesel / petrol engine operated available.
|
 |
|
|
Vacuum Pump
